A Secure the earth harness in place. Adjust its angle
beforehand, as required, not to run over the valve bolt
as shown below.
(1) Valve bolt
11. Put the relays to the relay stay.
(1) Relay stay
(2) Relay (with white connector)
(3) Relay (with black connector)
12. Using the cross-shaped clamps, secure the 3rd
function harness to the hoses, as shown below.
(A) Cable running over the
bolt (Not good)
ASSEMBLY INSTRUCTIONS
(1) 3rd function harness
(2) Loader valve tank hose
(3) 3rd function valve to loader valve pump hose
(4) 2-Clamps (72427-3133-30)
A Clamp the 3rd function harness at the white-taped
point.
13. Using the cross-shaped clamp, secure the 3rd function
harness to the hoses, as shown below.
(1) 3rd function harness
(2) 3rd function PP hose
(3) Clamps (72427-3133-30)
65