Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
TO THE DEALER
1. This manual contains procedures intended to assist
the dealer in unpacking and assembling the product
before delivering to the customer.
The customer's purchase is based on confidence in
both the product and your store.
procedures in this manual to assemble and adjust
equipment for your customer's safety and satisfaction.
When fully assembled, check function of each part and
feature.
2. The following safety alert symbol marks and
indications are found throughout this manual in steps
where particular attention is required so as to ensure
your safety and to avoid product damage. Observe
the instructions in these warnings where indicated.
Indicates
hazardous situation which, if not
avoided, will result in death or
serious injury.
Indicates
hazardous situation which, if not
avoided, could result in death or
serious injury.
Indicates
hazardous situation which, if not
avoided, could result in minor or
moderate injury.
Indicates
property damage could result if
instructions are not followed.
Gives helpful information
SAFETY
To prevent accidents, read through the following items
before starting work, and always regard safety when
working. It is your responsibility to ensure your safety on
the job.
1. Preparations
(1) Select a work site which is level, has sufficient
space, and is not close to dangerous objects.
(2) Avoid
poorly
rooms.
Asphyxiation from exhaust
fumes is always a possibility
that accompanies running an
engine.
Observe the
an
imminently
a
potentially
a
potentially
that
equipment
ventilated
(3) Working clothes which may
be pinched or caught in the
equipment must not be worn.
Loose clothing can cause
serious injury or death.
(4) Always wear a mask and
protective
work when dust or flying
debris may be thrown by
equipment.
2. Assembly and adjustments
(1) Before
equipment,
assembly instructions for the
product to become familiar
with
the
procedures.
(2) Use
only
required equipment, tools
and instruments (e.g. torque
wrench, battery hydrometer
and etc.).
or
(3) Set the parking brake and
block wheels to prevent
machine
movement.
(4) Lower the attachment or
implement to the ground
before
adjusting equipment.
(5) Before
suspended
equipment,
equipment
and utilize the valve lock to
prevent the machine from
falling or moving out of place.
(6) Keep fire from cigarettes,
matches or other ignition
sources away from fuel, oil,
antifreeze
flammable materials.
ASSEMBLY INSTRUCTIONS
goggles
during
assembling
read
the
equipment
and
adequate
and
(or
tractor)
assembling
or
working
under
or
raised
support
the
or
attachment
and
other
1
Advertisement
Table of Contents
