Self-Leveling Valve [M7998, M7999] (If Equipped) - Kubota LA1154A Assembly Instructions Manual

C Control valve cover section
1. Attach the valve cover to the valve stay.
(1) Valve cover
(2) 3-M8 x 20 bolts with washers
BSelf-Leveling Valve [M7998, M7999] (if
equipped)
C Hydraulic lines section
1. Put the stud bolt in the valve stay support.
[M7998 (ROPS MODEL)]
(1) Valve stay support
(2) 3-M12 x 30 bolts
(3) 2-M10 stud bolts
M10 stud Tightening torque
[M7999 (CAB MODEL)]
(1) Valve stay support
(2) M12 x 25 bolt
(3) 2-M12 x 35 bolts (original)
(4) 2-M10 stud bolts
2. Temporarily assemble the valve stay to the valve stay
(1) Valve stay
(2) 2-Stud bolts
(3) 2-M10 x 120 hex. bolts
24.5 to 31.4 N-m
(4) 2-M10 spring lock washers
(2.5 to 3.2 kgf-m)
(5) 2-M10 plain washers
(18.1 to 23.2 ft-lbs)
ASSEMBLY INSTRUCTIONS
M10 stud Tightening torque
support.
37
24.5 to 31.4 N-m
(2.5 to 3.2 kgf-m)
(18.1 to 23.2 ft-lbs)