14
ASSEMBLY INSTRUCTIONS
C Connector assembly stay section
1. Fit the connector assembly stay to the left and right
main frame as shown in the figure.
(1) 2-M10 x 60 bolts
(2) 2-M10 nuts
(3) 2-M10 plain washers
(4) 2-M10 spring lock washers
(5) Connector assy stay
A At the time of assembly, use the holes which showing
on the picture.
(A) Use these holes.
2. Connect the hoses between the connector assembly
stay and the valve as shown in the figure.
(1) Hydraulic hose
(Red, 500 mm (19.7 in.), 3/4-UNF and 3/4-UNF)
(2) Hydraulic hose
(Blue, 597 mm (23.5 in.), 3/4-UNF and 3/4-UNF)
(3) Hydraulic hose
(Yellow, 465 mm (18.3 in.), 3/4-UNF and 3/4-UNF)
(4) Hydraulic hose
(White, 559 mm (23.4 in.), 3/4-UNF and 3/4-UNF)