Table of Contents
Advertisement
48
ASSEMBLY INSTRUCTIONS
6. Connect the accumulator assembly (LH) to the main
frame (LH).
(1) Main frame (LH)
(2) Accumulator assy (LH)
(3) 2-M10 x 80 bolts
(4) 2-M10 plain washers
(5) 2-M10 spring washers
(6) 2-M10 nuts
7. Connect the tube to the accumulator assembly (LH).
(1) Tube
(2) Hydraulic hose (Connected to accumulator assy (LH))
(275 mm (10.8 in.), 3/4-UNF)
C Valve cover section
1. Remove the valve cover 2 from the valve cover.
(1) Valve cover
(2) Valve cover 2
(3) 3-M8 x 16 bolts with washers
2. Attach the valve cover as shown below.
(1) Valve cover
(2) 2-M8 x 20 bolts with washers
(without 3rd function valve kit)
2-M8 x 25 bolts with washer
(if equipped with 3rd function
valve kit)
(3) M8 x 20 bolt with washers
(A) Hose routing through here
Advertisement
Table of Contents
