Table of Contents
Advertisement
50
ASSEMBLY INSTRUCTIONS
(A) Adapter side
(B) Accumulator valve side
A Be careful not to confuse the orifice direction.
3. Attach the adapter back to the accumulator valve.
(1) Accumulator assy (RH)
(2) Adapter assy (3/4-UNF)
C Hydraulic hoses section
1. Remove the bolts which the connector assembly stay
is fasten, then fasten the accumulator assembly (RH)
to the main frame with the stay.
(1) Main frame (RH)
(2) Accumulator assembly (RH)
(3) 2-M10 x 90 bolts (without 3rd function valve kit)
2-M10 x 110 bolts (if equipped with 3rd function valve kit)
(4) 2-M10 plain washers (original)
(5) Connector assy stay (original)
(6) 2-M10 spring lock washers (original)
(7) 2-M10 nuts (original)
A Kits has 90 mm and 110 mm bolts, use applicable
bolts due to 3rd function valve kit is installed or not.
2. Fit the boom section adapter in position, and connect
the hose between the accumulator valve and the
control valve.
Advertisement
Table of Contents
