Assembly Instructions; To The Dealer; Safety - Kubota L3200 Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS

TO THE DEALER

1. This manual contains procedures intended to assist
the dealer in unpacking and assembling the product
before delivering to the customer.
The customer's purchase is based on confidence in
both the product and your store.
procedures in this manual to assemble and adjust
equipment for your customer's safety and satisfaction.
When fully assembled, check function of each part and
feature.
2. The following safety alert symbol marks and
indications are found throughout this manual in steps
where particular attention is required so as to ensure
your safety and to avoid product damage. Observe
the instructions in these warnings where indicated.
Indicates
hazardous situation which, if not
avoided, will result in death or
serious injury.
Indicates
hazardous situation which, if not
avoided, could result in death or
serious injury.
Indicates
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Indicates
property damage could result if
instructions are not followed.
Gives helpful information

SAFETY

To prevent accidents, read through the following items
before starting work, and always regard safety when
working. It is your responsibility to ensure your safety on
the job.
(1) Preparations
1. Select a work site which is level, has sufficient space,
and is not close to dangerous objects.
2. Avoid poorly ventilated rooms.
Asphyxiation from exhaust fumes
is always a possibility
accompanies running an engine.
Observe the
an imminently
a potentially
a potentially
that equipment or
that
ASSEMBLY INSTRUCTIONS
3. Working clothes which may be
pinched or caught
equipment must not be worn.
Loose clothing can cause serious
injury or death.
4. Always wear a mask
protective goggles during work
when dust or flying debris may be
thrown by equipment.
(2) Assembly and adjustments
1. Before assembling equipment,
read the assembly instructions for
the product to become familiar
with the equipment
procedures.
2. Use only adequate and required
equipment, tools and instruments
(e.g. torque wrench,
hydrometer and etc.).
3. Set the parking brake and block
wheels to prevent machine (or
tractor) movement.
4. Lower the attachment
implement to the ground before
assembling or
equipment.
5. Before working under suspended
or raised equipment, support the
equipment or attachment
prevent the machine from falling
or moving out of place.
6. Keep fire from
matches or other ignition sources
away from fuel, oil, antifreeze and
other flammable materials.
in the
and
and
battery
or
adjusting
to
cigarettes,
1