Table of Contents
Advertisement
Table 32 Settings > WiFi > Main WiFi
LABEL
Apply
Cancel
10.3 Guest WiFi Screen
This screen allows you to enable and configure guest wireless network settings on the NBG7815.
Click Settings > WiFi > Guest WiFi to show the following screen.
Note: This is not available if you are using bridge mode.
Figure 58 Settings > WiFi > Guest WiFi
The following table describes the labels in this screen.
Table 33 Settings > WiFi > Guest WiFi
LABEL
Enable Guest
WiFi
Name (SSID)
Password
Apply
Cancel
Chapter 10 Wireless LAN
DESCRIPTION
Click Apply to save your changes back to the NBG7815.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select Enable to activate the guest WiFi. Select Disable to turn it off.
An SSID profile is the set of parameters relating to one of the NBG7815's BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
The password has two uses.
•
Manual: Manually enter the same password on the Zyxel Device and the client. Enter 8-63
ASCII characters or exactly 64 hexadecimal ('0-9', 'a-f') characters.
•
WPS: When using WPS, the Zyxel Device sends this password to the client.
Click the Eye icon
to show or hide the password of your wireless network. When the Eye icon
is slashed
, you'll see the password in plain text. Otherwise, it is hidden.
Click Apply to save your changes back to the NBG7815.
Click Cancel to reload the previous configuration for this screen.
NBG7815 User's Guide
111
Advertisement
Table of Contents
