Power Requirements - tecan GENios Operating Manual

3.3 Power Requirements

June 2002 Operating Manual for GENios, GENios FL, and GENios Plus No: I 112 904 Rev No: 1.1
The instrument is auto sensing and it is therefore unnecessary to make any
changes to the voltage range. Check the voltage specifications on the rear panel
of the instrument and ensure that the voltage supplied to the instrument is correct
to this specification.
The voltage range is 100-120 / 220-240V.
If the voltage is not correct, please contact your distributor.
Do not use the instrument if the voltage setting is not correct.
If the instrument is switched ON with the incorrect voltage
Ensure that the correct type and rating of fuse is fitted.
Fuse = T 2A / 250 (slow blow)
REPLACE ONLY WITH THE SAME TYPE AND RATING OF FUSE.
Caution
setting it will be damaged.
WARNING
RISK OF FIRE!
3. Installation
3-3