Table of Contents
Advertisement
PTS 916 Cd
4.4 Operation via User Interface
4.4.1
General
In this section an overview is given of all statuses of the CCM.
The reactions of the compressor to actions of the operator and to
signals from the compressor itself, are also shown.
A: action (carried out by operator)
S: signal (generated by compressor)
R: reaction
4.4.2
Ready for Start status
Manual start
S
Warnings
A
Emergency stop button
↓-button, press once
A
↑-button, press once
A
↓-button, press continuously
A
↑-button, press continuously
A
A
Power OFF switch
A
System info button
A
Start command
Other actions and signals have no effect in this status.
30
R
Are shown on the screen
R
To emergency stop status (see
section 4.4.13)
R
Set pressure - 0.1 bar
R
Set pressure + 0.1 bar
R
Set pressure - 0.1 bar/second
R
Set pressure + 0.1 bar/second
R
End of operation
R
To system info status (see
section 4.4.14)
R
To permissive start status (see
section 4.4.4)
Automatic start
S
Warnings
A
Emergency stop button
↓-button, press once
A
↑-button, press once
A
↓-button, press continuously
A
↑-button, press continuously
A
A
Power OFF switch
A
System info button
A
OK button or Remote start input
(if Remote control mode)
Other actions and signals have no effect in this status.
4.4.3
Standby status
S
Warnings
A
Emergency stop button
↓-button, press once
A
↑-button, press once
A
↓-button, press continuously
A
↑-button, press continuously
A
A
Stop command
A
Autostart pressure reached
A
Power OFF switch
Other actions and signals have no effect in this status.
R
Are shown on the screen
R
To emergency stop status (see
section 4.4.13)
R
Set pressure - 0.1 bar
R
Set pressure + 0.1 bar
R
Set pressure - 0.1 bar/second
R
Set pressure + 0.1 bar/second
R
End of operation
R
To system info status (see
section 4.4.14)
R
To standby status (see section
4.4.3)
R
Are shown on the screen
R
To emergency stop status (see
section 4.4.13)
R
Set pressure - 0.1 bar
R
Set pressure + 0.1 bar
R
Set pressure - 0.1 bar/second
R
Set pressure + 0.1 bar/second
R
Automatic start deactivated. To
Ready for Start status, automatic
start (see section 4.4.2)
R
To permissive start status (see
section 4.4.4)
R
Automatic start deactivated. End
of operation
Preliminary
Advertisement
Table of Contents
