Table of Contents
Advertisement
PTS 916 Cd
4.4.13 Emergency stop status
Screen A: Emergency Stop is pressed.
Screen B: Emergency Stop is unlocked.
S
Warnings
↓-button, press once
A
↑-button, press once
A
↓-button, press continuously
A
↑-button, press continuously
A
A
Power OFF switch
If Emergency Stop is locked:
A
Unlock Emergency Stop
If Emergency Stop is unlocked:
A
Lock Emergency Stop
A
Reset button
Other actions and signals have no effect in this status.
36
R
Are shown on the screen
R
Set pressure - 0.1 bar
R
Set pressure + 0.1 bar
R
Set pressure - 0.1 bar/second
R
Set pressure + 0.1 bar/second
R
End of operation
R
To screen B
R
To screen A
R
To Ready for Start status (see
section 4.4.2)
4.4.14 System info status
This status gives a summary of the following parameters:
– Unit Type
– Unit Serial Number
– Engine Serial Number
– Fleet Number
– Maximum Setpressure
– Minimum Setpressure
– Maximum Set RPM
– Unload pressure
– Reload pressure
– Output Code: This code is directly proportional to the Maximum set
RPM, and gives a rough indication of the maximum Free Air
Delivery (FAD) with the current setting.
– Active Control Mode: Local control; Remote control; PC control.
– Air Inlet Temperature
– Battery Voltage
– Software version UI
– Software version CCM
↓-button, press once
A
↑-button, press once
A
A
Return button
A
Options button
A
Emergency stop button
A
Power OFF switch
Other actions and signals have no effect in this status.
R
Set pressure - 0.1 bar
R
Set pressure + 0.1 bar
R
To Ready for Start status (see
section 4.4.2)
R
To options status (see section
4.4.15)
R
To emergency stop status (see
section 4.4.13)
R
End of operation
Preliminary
Advertisement
Table of Contents
