Chapter 6
Cabling the Line Ports and Completing the Installation
Optical Bypass Module Connectivity
•
•
Single Link Topology
A single link requires only one bypass module.
•
•
•
•
•
Dual Link Topology
A dual link requires two bypass modules.
•
•
•
•
•
•
•
•
•
•
Cabling the 10GBE Line Interface Ports
Note
When installing an External Optical Bypass module, the Cisco SCE8000 line ports are connected to the
module. See
page 6-11
Warning
Class 1 laser. Avoid exposure to radiation and do not stare into open aperture.
•
•
•
•
OL-16478-03
Single Link Topology, page 6-9
Dual Link Topology, page 6-9
Subscriber side network element <->Port A on the bypass module
Cisco SCE8000 port 3/0/0 <->Port C on the bypass module
Network side network element <->Port B on the bypass module
Cisco SCE8000 port 3/1/0 <->Port D on the bypass module
CTRL <->left-hand 'Optical Bypass' port on Cisco SCE8000-SCM-E module.
Subscriber side network element <->Port A on bypass module #1
Cisco SCE8000 port 3/0/0 <->Port C on bypass module #1
Network side network element <->Port B on bypass module #1
Cisco SCE8000 port 3/1/0 <->Port D on bypass module #1
CTRL on bypass module #1 <->left-hand 'Optical Bypass' port on Cisco SCE8000-SCM-E module.
Subscriber side network element <->Port A on bypass module #2
Cisco SCE8000 port 3/2/0 <->Port C on bypass module #2
Network side network element <->Port B on bypass module #2
Cisco SCE8000 port 3/3/0 <->Port D on bypass module #2
CTRL on bypass module #2 <->right-hand 'Optical Bypass' port on Cisco SCE8000-SCM-E
module.
Cabling the 10GBE Line Interface Ports: Using the External Optical Bypass Module,
for complete instructions.
Fiber Specifications, page 6-10
Optical Device Maintenance, page 6-10
How to Cable the 10GBE Line Interface Ports, page 6-10
Cabling the 10GBE Line Interface Ports: Using the External Optical Bypass Module, page 6-11
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
Cabling the 10GBE Line Interface Ports
6-9