The Sce8000-Sip; The 1-Port 10Gbe Spa Interface Module - Cisco SCE8000 Installation And Configuration Manual

Chapter 2 Introduction to the Cisco SCE8000 Platform
The XFP operating temperature range is 0°C to 70°C.
Table 2-4
XFP
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
XFP-10GZR-OC192LR
XFP-10G-MM-SR

The SCE8000-SIP

Table 2-5
LEDs
Status

The 1-Port 10GBE SPA Interface Module

The SCE8000-SIP is installed in slot #3 of the Cisco SCE8000 chassis. It hosts up to four single-width,
single-height 1-Port 10GBE SPA interface modules, but in the Cisco SCE8000, it must be configured
with either two 1-Port 10GBE SPAs (in the top two subslots) or four 1-Port 10GBE SPAs, to provide
interfaces for either one or two complete traffic links.
Figure 2-6
OL-16478-03
XFP Port Cabling Specifications
Wavelength
1310 nm
1550 nm
1550 nm
850 nm
SCE8000-SIP LED
Description
Green —Operational
•
Flashing Amber - Electrical bypass in operation
•
Red - Not initialized or failed
•
Unlit —No power
•
1-Port 10GBE SPA Interface Module
1
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
Introduction to SIPs and SPAs
Fiber Type
SMF
SMF
SMF
MMF
SPA-1X10GE-L-V2
2
2-7