Handling Spas - Cisco SCE8000 Installation And Configuration Manual

Removing and Replacing Shared Port Adapters
Figure 9-15
Class 1 laser product. Statement 1008
Warning
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
Warning Class 1 LED product. Statement 1027

Handling SPAs

Each SPA circuit board is mounted to a metal carrier and is sensitive to electrostatic discharge (ESD)
damage.
Always handle the SPA by the carrier edges and handle; never touch the SPA components or connector
pins.
When a subslot is not in use, a SPA blank filler plate must fill the empty subslot to allow the chassis to
conform to electromagnetic interference (EMI) emissions requirements and to allow proper airflow
across the installed modules. If you plan to install a SPA in a subslot that is not in use, you must first
remove the SPA blank filler plate.
Figure 9-16
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
9-24
Class 1 Laser Warning Labels for SPA Ports
CLASS 1 LASER PRODUCT
LASERPRODUKT DER KLASSE 1
PRODUIT LASER DE CLASSE 1
1
PRODUCTO LASER CLASE 1
(SeeFigure 9-16.)
Handling a SPA
Metal carrier
Printed circuit board
Chapter 9 Removal and Replacement Procedures
OL-16478-03