Safety - Cisco SCE8000 Installation And Configuration Manual

Removal and Replacement Procedures
This chapter describes how to perform removal and replacement procedures for Cisco SCE8000 platform
field-replaceable units (FRUs).
Warning Before you install, operate, or service the system, read the Regulatory Compliance and Safety
Information for the Cisco SCE8000 . This guide contains important safety information you should know
before working with the system.
•
•
•
•
•
•
•
•

Safety

Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units.
Warning The plug-socket combination must be accessible at all times because it serves as the main
disconnecting device.
Warning Class 1 laser product.
OL-16478-03
Safety, page 9-1
Preventing Electrostatic Discharge Damage, page 9-2
Supported Hardware, page 9-3
Removing and Replacing the Power Supply, page 9-3
Removing and Replacing the Fan Assembly, page 9-11
Removing and Replacing Modules, page 9-13
Removing and Replacing Shared Port Adapters, page 9-23
Removing and Replacing the Optical Bypass Module, page 9-26
C H A P T E R
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
9
9-1