Man/Auto Ventilation Switch - Getinge Maquet FLOW-i 4.2 User Manual

6.3 O flush
2
The O flush is used to manually supply the
2
breathing system with an additional gas flow
from the O gas supply. For details refer to
2
section Fresh gas flow on page 273. This gas
supply will not go through the vaporizer. Press
and hold in. The flow will continue as long as
the button is depressed.
If the O flush is used during AUTO mode
2
ventilation, the excess pressure is released
via the expiratory valve. Set PEEP is
maintained throughout the flush procedure.
FLOW-i 4.2, User's Manual

6.4 MAN/AUTO ventilation switch

See page 84 for a detailed description.
| Breathing system | 6 |
121