Electromagnetic Emissions - Getinge Maquet FLOW-i 4.2 User Manual

14.2 Electromagnetic emissions

Guidance and manufacturer's declaration - electromagnetic emissions
The FLOW-i is intended for use in the electromagnetic environment specified below. The customer or
the user of the FLOW-i should assure that it is used in such an environment.
Emissions test
RF-emissions
CISPR11
RF-emissions
CISPR11
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
FLOW-i 4.2, User's Manual
Compliance Electromagnetic environment - guidance
Group 1 The FLOW-i uses RF energy only for its internal function.
Therefore its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Class A The FLOW-i is suitable to use in all establishments other than
domestic and those directly connected to the public
low-voltage power supply network that supplies buildings
Not applicable
used for domestic purposes.
Not applicable
| EMC Declaration | 14 |
293