Y35 HD v3
User Manual & Install Guide
Trigger Snap
Alarm Snap
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop list allowing
▪
you to select a particular camera
channel.
The
settings for this channel will be
displayed for editing.
Snap Enable – if the checkbox is
▪
selected, then this camera channel is
included when the Y35 HD v3 performs
the snap shot task.
Resolution – this drop list enables you
▪
to select the resolution for the
snapshots. Available options are (CIF,
WCIF, HD1, WHD1, D1, WD1, 720P).
Quality – this drop list enables you to
▪
select the quality of the snapshot on a
scale of 1 to 8 (where 1 is best).
Upload Type – checkboxes which
▪
allow you to select whether the
snapshots are to be uploaded to FTP
and/or Server.
Image Quantity– numeric text field to
▪
key in the number of snapshots that
will be taken.
Interval – numeric text field to key in
▪
the interval (in seconds) between
snapshots.
Copy To – this feature allows you to
▪
copy the current snapshot settings for
this channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot task settings.
Once you have selected the channel to
copy to, click on the (Copy) button to
make the copy.
DEFAULT SETTINGS:
Checkbox – Unselected
▪
Setting this enables the device to automatically
take snapshots whenever an alarm event
occurs.
Clicking the (Setup) button displays the snap
link settings page which allows you to
associated
snapshot
105 of 156