Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
Speed Alarm
Speed
Output Delay Time – numeric text
▪
field to set the delay time for the IO
output (in seconds).
Alarm Image Upload – checkbox, if
▪
selected will enable the device to
upload the alarm to the center server.
Linkage Screen – drop list to select the
▪
options to display the video from the
selected cameras on-screen when the
alarm occurs.
None : Not displayed.
Single : Display 1 camera.
Double : Display 2 cameras.
Quad : Display 4 cameras.
If Single (1x1), Double (2x1), or Quad (2x2)
display is selected, the (Setup) button allows
you to select the layout of the channels to be
displayed on-screen.
The drop lists are shown on-screen accordingly
to the grid layout mode selected. You can easily
choose each individual camera channel to be
displayed in the selected grid segment visually.
If you have less cameras than available grid
segments, then those segments associated
with an actual camera will be displayed as a
black box.
Alarm Snap – checkbox – if selected,
▪
when the alarm occurs, the device will
take snap shots using the selected
cameras.
DEFAULT SETTINGS:
Please choose the camera channels to display
and record in the event of this alarm being
triggered. These settings would need to be
determined by the customer/client to match
their specific business requirements.
Checkbox – if selected, enables the device to
monitor for overspeed events. In case of speed
exceeding the specified threshold, this alarm
will be triggered. To set the volume to MUTE
for this alarm go to Basic Setup → Other Setup
→ Voice Setup. TTS should be set to zero.
111 of 156
Advertisement
Table of Contents
