Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
Enable
Resolution
Percentage
of
Main
Stream
Encode Standard
Frame Rate
Checkbox – if selected, enables this channel for
inclusion into the main stream recording.
DEFAULT SETTINGS:
For channels 1 to 5, only enable the
▪
channels which actually have cameras
connected. Please note that the system
will show a video loss message on
channels which are enabled, but do not
have a connected camera (i.e., no
incoming video stream).
Drop list for selecting the resolution to record
the video on this channel (applicable to
channels 1 to 4):
CIF (352x240)
▪
WCIF (464x240)
▪
HD1 (704x240)
▪
WHD1 (928x240)
▪
D1 (704x480)
▪
WD1 (928x480)
▪
720p (1280x720)
▪
1080p (1920x1080)
▪
DEFAULT SETTINGS:
For channels 1 to 4 (analog camera
▪
channels), the camera with the highest
resolution should automatically be
detected and used. (i.e. If a S31AHD is
connected, the resolution should set to
720p, if a S32AHD is connected; 1080p
etc)
For the Digital IP Camera (channel 5), it
▪
should automatically detect and use
the camera with the highest resolution.
DEFAULT SETTINGS:
22.2%
▪
DEFAULT SETTINGS:
H264
▪
Note – Read GLOSSARY for more information
Drop list allowing you to select the frame rate
(in terms of frames per second) that you would
like to record at.
DEFAULT SETTINGS:
For all channels (1 to 5), set the following:
15
▪
91 of 156
Advertisement
Table of Contents
