Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
Ensure included gasket is in place between dome base plate and mounting surface.
▪
When installing multiple cameras, mark camera harness wires so the school district knows which
camera is front and back by looking at the marked Molex output connectors.
Important Notes
Routing the Camera Harness (GSWHC2N-XX):
Always use grommets when running the harness through sheet
▪
metal holes.
Avoid excessively tight bends especially around metal surfaces.
▪
Coil and tie off excess harness in a safe place.
▪
DO NOT disassemble the Camera Ball unless directed to, and
under the supervision of an authorised Gatekeeper Systems support technician.
Camera Body Parts
A : Rubber Gasket
B : Base Plate
B1 : Cut Out Notches
C
: Camera Ball
D : Camera Collar
E
: Retainer Ring
152 of 156
Advertisement
Table of Contents
