Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
Device Info
Vehicle Info
Driver Info
4.6 Step 6: Setting Basic Preferences
Next you will need to setup the ignition on/off delay time.
Navigate to:
Main Menu
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see
ON/OFF
Device ID
Vehicle Plate
Vehicle Num
Line Number
Driver Number
Driver Name
Setup
Basic Setup
→
→
Section
6.3.3.
ON/OFF Mode
DVR Power Off Delay
Leave this value as it is, unless directed to
change by Gatekeeper Project Team.
You can use this field to key in the vehicle
registration plate number.
Maximum of: 10 characters
Key in the identification code which will be used
to identify this particular vehicle in the fleet.
Maximum of: 10 characters
You may use this field to identify a particular
route (if any) that the vehicle will be operating
on.
Maximum of: 10 characters
If the vehicle will have a specific driver, you may
use this field to key in the identification number
of the driver (if required).
Maximum of: 10 characters
If desired, you may also key in the name of the
vehicle driver here.
Maximum of: 10 characters
Startup
→
DEFAULT SETTINGS:
Ignition
▪
DEFAULT SETTINGS:
600
▪
This means that when the vehicle is turned off,
the device will continue to stay powered for
39 of 156
Advertisement
Table of Contents
