Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
CP
Snap
R-Watch
Name
Output Delay Time – numeric text
▪
field to set the delay time for the IO
output (in seconds).
Linkage Screen – drop list to select the
▪
options to display the video from the
selected cameras on-screen when the
alarm occurs.
Alarm Image Upload – checkbox, if
▪
selected will enable the device to
upload the alarm to the center server.
Adkit Voice: Unselected- if selected,
▪
the device will play an mp3 recording
when alarm is triggered to alert the
driver.
Click the (Setup) button under Snap to display
the Snap setup screen. This sets up the
snapshot options associated with this alarm.
The Snap setup screen enables you to
configure the following options:
Snap Mode – drop list to select the
•
number of snapshots taken when the
alarm is first triggered. (Single or
Many).
Number of Snaps – drop list to select
•
the total number of snapshots
captured when the alarm is triggered.
Snap Interval – numeric text field to
•
set the time (in milliseconds) between
snapshots taken when the alarm is
triggered.
Enable – checkbox – if selected, these
•
channels will have a snapshot taken of
them.
FTP – checkbox – if selected, will
•
allow the snapshots taken of the
channel to be transferred remotely.
Resolution – drop list to select the
•
resolution of the snapshot for the
specified channel.
Quality – drop list to select the quality
•
of the snapshot (1 being best) for the
specified channel.
DEFAULT SETTINGS:
Checkbox – Selected
▪
Name of the Alarm
129 of 156
Advertisement
Table of Contents
