Y35 HD v3
User Manual & Install Guide
Linkage
10 minutes
▪
Temp. Increase Difference
DEFAULT SETTINGS:
20 ° Celsius
▪
Debounce Time – multiple alarms of the same
resource active within the debounce time frame
are regarded as one alarm.
DEFAULT SETTINGS:
10 seconds
▪
Click the (Setup) button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm. The Linkage setup
screen enables you to configure the following
options:
Channel – checkboxes which allow you
▪
to select any combination of the
camera channels to be included in the
display
and
Recording – drop list which allows you
to select the duration for which video
will continue to be recorded when the
alarm is triggered.
Lock – checkbox, if selected will mark
▪
the recorded video associated with this
alarm as locked video.
Linkage IO Output – checkboxes, if
▪
enabled, the device will send a signal
to the selected IO output lines.
Output Delay Time – numeric text
▪
field to set the delay time for the IO
output (in seconds).
Linkage Screen – drop list to select the
▪
options to display the video from the
selected cameras on-screen when the
alarm occurs.
None : Not displayed.
Single : Display 1 camera.
Double : Display 2 cameras.
Quad : Display 4 cameras.
recording.
§
Post
124 of 156