Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
DSM
Snap
R-Watch
Name
Enable
Alarm Type
Trigger
when alarm is triggered to alert the
driver.
Click the (Setup) button under Snap to display
the Snap setup screen. This sets up the
snapshot options associated with this alarm.
The Snap setup screen enables you to
configure the following options:
Snap Mode – drop list to select the
•
number of snapshots taken when the
alarm is first triggered. (Single or
Many).
Number of Snaps – drop list to select
•
the total number of snapshots
captured when the alarm is triggered.
Snap Interval – numeric text field to
•
set the time (in milliseconds) between
snapshots taken when the alarm is
triggered.
Enable – checkbox – if selected, these
•
channels will have a snapshot taken of
them.
FTP – checkbox – if selected, will
•
allow the snapshots taken of the
channel to be transferred remotely.
Resolution – drop list to select the
•
resolution of the snapshot for the
specified channel.
Quality – drop list to select the quality
•
of the snapshot (1 being best) for the
specified channel.
DEFAULT SETTINGS:
Checkbox – Selected
▪
Name of the Alarm
DEFAULT SETTINGS:
Checkbox - Unselected
▪
DEFAULT SETTINGS:
Alarm
▪
Click the (Setup) button under Trigger to
display the Trigger setup screen.
Level Speed Range – numeric text field to
enter the speed range in MPH.
127 of 156
Advertisement
Table of Contents
