Gatekeeper Y35 HD v3 User Manual & Installation Manuallines page 112

Y35 HD v3 User Manual & Install Guide
Preload Speed Difference: Numeric field to key in a value for when the vehicle goes over a
▪
specified speed prior to the actual speed limit.
Speed: Numeric field to key in the speed value over which the device will flag an over speed
▪
alarm.
Duration: Numeric field to set the duration of the alarm (in seconds).
▪
Save Settings: Click the (OK) button to save the alarm settings.
▪
Back to Previous: Click the (Cancel) button to return to the previous screen without saving.
▪
Alarm Type
Trigger
Linkage
DEFAULT SETTINGS:
Checkbox – Unselected
▪
Drop list to select the classification level for the
alarm:
Event
▪
Alarm
▪
DEFAULT SETTINGS:
Disabled/not applicable.
Click the (Setup) button under Trigger to
display the Trigger setup screen.
DEFAULT SETTINGS:
Disabled/not applicable.
Click the (Setup) button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm.
112 of 156