ELECTRO FREEZE Model CS600
12 Routine Maintenance
Electro Freeze recommends the following schedule to help maintain your Model CS600
freezer in like-new operating condition. Take the time to learn and perform these routine
procedures and receive in return many years of valuable service from your freezer. Protect
your investment!
1. Disassemble, wash, rinse, sanitize,
air-dry, reassemble and sanitize all parts
which come into contact with the mix.
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so could
create a health hazard.
2. Clean the cylinder, cylinder inlet
tubes and drain tube with the appropriate
brushes.
1. Carefully inspect all parts for wear,
including scraper blades and beater shaft.
Replace as required.
20
DAILY
CAUTION
WEEKLY
3. When cleaning, inspect all
seals and O-rings. Replace any O-
ring or seal that is worn, torn, or
loose-fitting.
4. Wipe all exterior surfaces of
the freezer to remove any splattered
mix.
5. Check overrun and tempera-
ture of the product.
184596