H.C Duke & Son Electro Freeze COMPACT Series Operator's Manual page 15

ELECTRO FREEZE Model CS600
5 Part Names and Functions
Figure 5-2
O-RING
TUBE-MIX FEED
Figure 5-3
6
Beater Shaft Assembly
INSERT-ASSY . MIX FEED
4
3
O-RING
2
1
Mix Feed Tube Assembly
1 BAR - BREAKER. Keeps product
blended in the center of the beater shaft.
2 SHAFT - BEATER. Rotates in the
freezing cylinder blending air and mix. Ejects
product when dispensing plunger is opened.
3 BLADE-SCRAPER Scrapes frozen
product from cylinder walls.
SEAL - SHAFT. Seals the opening between
the freezing cylinder and the beater shaft.
consists of:
SEAL - BEATER SHAFT
4
5 WASHER-DOUBLE SHAFT
SEAL
1 TUBE - MIX FEED .188. Meters the
correct amount of mix and air into the
freezing cylinder from the hopper.
2 O-RING - TUBE. Seals the opening
between the hopper and mix feed tube. (O-
rings do not need lubrication.)
3 INSERT-ASSY MIX FEED. Provides a
positive shut off of mix flow to the freezing
cylinder.
4 O-RING - INSERT. Holds the insert
tube in place in the mix tube. Must be
lubricated.
184596