H.C Duke & Son Electro Freeze COMPACT Series Operator's Manual page 6

ELECTRO FREEZE Model CS600
Safety Decal Locations
184596
Do not attempt to operate the freezer until
all safety precautions and operating
instructions in this manual are read and
understood.
Take notice of all warning, caution, instruc-
tion and information decals (or labels) on
the freezer as shown in the figure on the
following page. The labels have been put
there to help maintain a safe working
environment.
The labels have been designed to with-
stand washing and cleaning. All labels
must remain legible for the life of the
freezer. Check labels periodically to be
sure they can be recognized as warning
labels.
If it is necessary to replace any label,
please contact your local authorized
Electro Freeze Distributor or H. C. Duke &
Son. When ready to order you will need to
determine the (1) part number, (2) type of
label, (3) location of label, and (4) quantity
required, and include a return shipping
address.
No. Part No.
1
HC165126
2
HC165025
You may contact your local authorized
Electro Freeze Distributor, as follows:
Name:
Address:
Phone:
or — for factory service assistance —contact
H. C. Duke & Son, LLC, Electro Freeze
Service Department by phone or FAX:
(The decals on the next page are numbered
1 and 2. Those numbers correspond to the
numbers in the table below. The table
provides the part number, description, and
quantity for each decal.)
Description (Qty)
Decal — Panel Removal Warning (3)
Decal — Beater Warning (1)
iv
Phone: 309-755-4553
800-755-4545
FAX: 309-755-9858
E-mail: service@hcduke.com