ELECTRO FREEZE Model CS600
5
Part Names and Functions
HANDLE -
DISPENSE
KNOB -
HAND
Figure 5-1
Head Assembly
cylinder and provides an opening for product
to be dispensed.
to the freezing cylinder. Must be lubricated.
plunger in the head. Must be lubricated to
seal and slide freely.
freezer when dispensing. Must be in place
before freezer will operate.
184596
1
HEAD. Encloses the freezing
2
O-RING - HEAD. Seals the head
3
O-RING - PLUNGER. Seals the
4
ROD - PLUNGER. Starts the
ROD - PLUNGER
PLUNGER
O-RING - PLUNGER
O-RING - HEAD
DISPENSE - HEAD
PIN - HANDLE
NOZZLE
5
PLUNGER. Seals the product
opening in the head when closed. Allows
product to flow when open.
6
HANDLE - DISPENSE. Opens and
closes the plunger to start and stop the flow
of product from the freezer.
7
PIN - HANDLE. Secures handle to
the head.
8
KNOB - HAND. Secures the head
to the freezing cylinder.
9
NOZZLE. Shapes the frozen
product as it is dispensed.
5