Get Agent Trap Enable; Retrieving Information; Ip Address - Cisco 15216 EDFA2 Operation Manual

Retrieving Information

5.5.4 Get Agent Trap Enable

Command
snmp attribute get local cerent15216EdfaAgentTrapEnable
Syntax Description snmp attribute get local cerent15216EdfaAgentTrapEnable
Gets the SNMP enable trap status. The system responds with either "enabled" or "disabled".
5.6 Retrieving Information
The following SNMP commands access ONS 15216 EDFA2 information.

5.6.1 IP Address

Command snmp table display local cerent15216EdfaSromIpMgmtGroup
Syntax Description snmp table display local cerent15216EdfaSromIpMgmtGroup
Displays the ONS 15216 EDFA2 IP address.
The following SNMP command displays the ONS 15216 EDFA2's IP address and other networking
information:
•
Example 5-10 cerent15216EdfaSromIpMgmtGroup Display Command
ash:hostname:ONS15216 EDFA2> snmp row display local cerent15216EdfaSromIpMgmtGroup
CLASS cerent15216Edfa-SROM-IP-ADDRESS-MIB.cerent15216EdfaSromIpMgmtGroup ::=
{
};
Table 5-15
Cisco ONS 15216 EDFA2 Operations Guide
5-24
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
snmp row display local cerent15216EdfaSromIpMgmtGroup command
cerent15216EdfaSromIpMgmtEnetAddress =
cerent15216EdfaSromIpMgmtEnetSubNetMask =
cerent15216EdfaSromIpMgmtDefaultRouterAddress =
cerent15216EdfaSromIpMgmtHostName =
describes the other attributes displayed by these commands.
Chapter 5 SNMP MIB Installation and Configuration
172.22.82.19;
255.255.0.0;
172.22.82.1;
"hostname";
(Example 5-10)
78-16033-01