Clear Netconf-Yang Agent Session - Cisco NCS 5000 Series Manual

Secure Shell Commands

clear netconf-yang agent session

To clear the specified netconf agent session, use the clear netconf-yang agent session in EXEC mode.
clear netconf-yang agent session session-id
Syntax Description
session-id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 6.0
Usage Guidelines
No specific guidelines impact the use of this command.
The show netconf-yang clients command can be used to get the required session-id(s).
Task ID
Task ID
config-services
Examples This example shows how to use the clear netconf-yang agent session command:
RP/0/RP0/CPU0:router (config) #
The session-id which needs to be cleared.
Operation
read, write
clear netconf-yang agent session 32125
System Security Command Reference for Cisco NCS 5000 Series Routers
clear netconf-yang agent session
Modification
This command was introduced.
147