Output Power - Cisco 15216 EDFA2 Operation Manual

Chapter 5 SNMP MIB Installation and Configuration
5.6.6.2 Loss of Signal (Input Power) Alarm Threshold
Command snmp attribute get local cerent15216EdfaLOSThreshold
Syntax Description
snmp attribute get local cerent15216EdfaLOSThreshold
Displays the loss of signal (input power) alarm threshold.
The following command displays the loss of input power alarm threshold and other laser power and
temperature data:
•
The cerent15216EdfaLOSThreshold attribute in the cerent15216EdfaCfgGroup display command shows
the loss of input power alarm threshold
For information about all of the parameters in the cerent15216EdfaCfgGroup table, refer to
page
5.6.6.3 Loss of Signal (Input Power) Alarm Hysteresis
Command
snmp attribute get local cerent15216EdfaLOSHysteresis
Syntax Description
snmp attribute get local cerent15216EdfaLOSHysteresis
Displays the loss of signal (input power) alarm hysteresis value.
The following command displays the loss of input power hysteresis value and other laser power and
temperature data:
•
The cerent15216EdfaLOSHysterisis attribute in the cerent15216EdfaCfgGroup display command shows
the loss of input power alarm threshold
parameters in the cerent15216EdfaCfgGroup table, refer to

5.6.7 Output Power

5.6.7.1 Output Power Value
5.6.7.1.1 OutPowermW
Command snmp attribute get local cerent15216EdfaOutPowermW
Syntax Description
snmp attribute get local cerent15216EdfaOutPowermW
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
snmp row display local cerent15216EdfaCfgGroup command
5-12.
snmp row display local cerent15216EdfaCfgGroup command
(Example 5-14 on page 5-28).
(Example 5-14 on page 5-28). For information about all of the
Table 5-6 on page
Cisco ONS 15216 EDFA2 Operations Guide
Retrieving Information
Table 5-6 on
5-12.
5-31