Table 9-37 Rtrv-Cond-Env Syntax Description - Cisco 15216 EDFA2 Operation Manual

Chapter 9 TL1 Commands
F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-37 RTRV-COND-ENV Syntax Description

Parameter
aid
conddescr
condtype
date
ntfncde
ocrdat
ocrtm
sid
srveff
time
78-16033-01
Syntax Description
Specifying PWR-A or PWR-B in input has a filter effect on the
response.
PWR-A Affecting Power Bus A (or both A and B).
PWR-B Affecting Power Bus B.
ALL Any or all of the preceding (command input only).
Detailed text description of the event. The conddescr is 1 to 64
characters of ASCII text. See condtype below.
Condition type identifies the type of alarm (maps to
cerent15216EdfaLogEventID). Possible condtype and
corresponding conddescr (in quotes) are:
PWRBUSA "Power Bus A (voltage) Alarm"
(cerent15216EdfaAlarmPowerBusA).
PWRBUSB "Power Bus B (voltage) Alarm"
(cerent15216EdfaAlarmPowerBusB).
yyyy-mm-dd Date of origination of TL1 message.
Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
CR Critical alarm.
MJ Major alarm.
MN Minor alarm.
NA No alarm.
m-d Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
h-m-s Time (hour-minute-second) of the event occurrence (derived
from cerent15216EdfaDateAndTimeString).
string Source identifier uniquely identifies the source of a TL1
autonomous command.
Effect on service. Possible values are:
SA Service affecting.
NSA Non-service affecting.
hh:mm:ss Time of origination of TL1 message.
TL1 Commands and Autonomous Messages
Cisco ONS 15216 EDFA2 Operations Guide
9-45