Inh-Msg-All; Table 9-22 Ent-User-Secu Syntax Description; Table 9-23 Inh-Msg-All Syntax Description - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages

Table 9-22 ENT-USER-SECU Syntax Description

Parameter
uid
pid
al

9.7.16 INH-MSG-ALL

Command INH-MSG-ALL
Prohibits the dispatch of some automatic messages from the ONS 15216 EDFA2 as specified in the
parameters. Does not affect response from RTRV commands.
Syntax
INH-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];
Example 9-18 INH-MSG-ALL Command
Amp01:ONS15216 EDFA2> INH-MSG-ALL:Amp01::123::MJ,LOS;

Table 9-23 INH-MSG-ALL Syntax Description

Parameter
ntfncde
Cisco ONS 15216 EDFA2 Operations Guide
9-22
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
string
string
R
RW
RWA
Syntax
CR
MJ
MN
NA
CL
Description
The user identifier (user name) of the new user being created.
Can be any combination of up to 10 alphanumeric characters.
The user's private identifier (password). Must be a string of up
to 10 characters, where at least 2 are non-alphabetic characters
and at least 1 is a special character. Special characters are +, #,
and %. (defined in Telcordia GR-831-CORE).
Access level of the user. See
for TL1 Commands" section on page 9-6
permissions.
Read only privileges.
Read and write privileges.
Read, write, and administrative privileges.
Description
Notification code of the alarm or event that is to be
allowed (maps to cerent15216EdfaAlarmPriority for
active alarms). A null maps to none of the codes, i.e.,
with a null, all existing ntfncde inhibitions are kept
unchanged. Possible values are:
Critical alarm.
Major alarm.
Minor alarm.
No alarm.
Cleared alarm.
Chapter 9 TL1 Commands
"Summary of Security Permissions
for access level
78-16033-01