Flash File System Commands; Ffs File List Command - Cisco 15216 EDFA2 Operation Manual

Flash File System Commands

Syntax Description shell type modify {tl1 | ash}
Sets the shell type to TL1 or ASH for the ONS 15216 EDFA2's RS-232 (EIA/TIA-232) port (accessed
via HyperTerminal) and the default TCP/IP port on the ONS 15216 EDFA2's LAN port (accessed via
Telnet). The default is TL1. This command requires a system reboot using the processor reset command
for changes to take effect.
To return to the ASH shell from the TL1 shell, use the command ED-NE-GEN. (See Step
via LAN Port Using Telnet (Optional), page 4-3" section on page
6.5 Flash File System Commands
The flash file system (FFS) file commands allow the user to manage the number of files that are on the
ONS 15216 EDFA2 Flash memory. Never erase the following files:
•
•
Because the snmp.cfg file contains important SNMP attributes, deleting this file would mean that the
community and view tables would have to be reset before a remote user could access the
ONS 15216 EDFA2 via SNMP.
EDFA software image files are named using a special naming convention. Do not change the file name
when image files are downloaded from an FTP server onto the box in the field when using the FTP
command shell of the ONS 15216 EDFA2.

6.5.1 ffs file list Command

Command ffs file list
Syntax Description ffs file list
List the files on the ONS 15216 EDFA2 Flash memory. See
Example 6-12 ffs file list Command
ash:hostname:ONS15216 EDFA2> ffs file list
--------name--------
15216EdfaSw_2.3.0
15216EdfaSw_2.1.0
Cisco ONS 15216 EDFA2 Operations Guide
6-14
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Two current versions of software (15216EdfaSw_x.x.x)
snmp.cfg
type status
1
snmp.bak 1
passwd 2
snmp.cfg 1
1
length rename_bam attributes
fffc xxxxxxx ffffffff
fffc 1709 00140001
fffc -1 ffffffff
fffc 1709 ffffffff
fffc 1681923 ffffffff
Chapter 6
4-1.)
Example 6-12.
ffffffff
ffffffff
ffffffff
ffffffff
ffffffff
ASH Commands
3. in "Log In
78-16033-01