Restore Commands; Backup System Command; Restore System Command - Cisco 15216 EDFA2 Operation Manual

Chapter 6 ASH Commands
};
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaCommTrapEntry ::=
{
};

6.9 Restore Commands

6.9.1 backup system Command

Command backup system
Syntax Description backup system filename
Creates a backup file on the FFS with the configuration information of the ONS 15216 EDFA2. This file
contains manufacturing information about the unit that is being backed up (such as part number and
serial number), setup information for the unit (such as IP address and host name), all configuration
information (such as alarm thresholds and pump mode), and the user database.

6.9.2 restore system Command

Command restore system
Syntax Description
restore system filename
Restores the configuration information from a backup file on the FFS to the ONS 15216 EDFA2. During
this process, all configuration information (such as alarm thresholds and pump mode) and the user
database from the file are replaced in the ONS 15216 EDFA2 memory and FFS. Before the restore
begins, a cyclic redundancy code (CRC) check is performed to ensure data integrity.
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
cerent15216EdfaCommTrapIndex =
cerent15216EdfaCommTrapCommunity =
cerent15216EdfaCommTrapDestIPAddress =
cerent15216EdfaCommTrapDestUDPPort =
cerent15216EdfaCommTrapViewIndex =
cerent15216EdfaCommTrapVersion =
cerent15216EdfaCommTrapStatus =
cerent15216EdfaCommTrapIndex =
cerent15216EdfaCommTrapCommunity =
cerent15216EdfaCommTrapDestIPAddress =
cerent15216EdfaCommTrapDestUDPPort =
cerent15216EdfaCommTrapViewIndex =
cerent15216EdfaCommTrapVersion =
cerent15216EdfaCommTrapStatus =
1;
"private";
172.22.87.50;
162;
1;
v2;
active;
2;
"private";
172.22.87.254;
162;
1;
v2;
active;
Cisco ONS 15216 EDFA2 Operations Guide
Restore Commands
6-31