Rtrv-Alm-Eqpt; Table 9-33 Rtrv-Alm-Eqpt Syntax Description - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages
Table 9-32 RTRV-ALM-ENV Syntax Description (continued)
Parameter
ocrdat
ocrtm
sid
time

9.7.26 RTRV-ALM-EQPT

Command
RTRV-ALM-EQPT
Generates a report on all active alarms (except environmental alarms as per Telcordia GR-833-CORE).
Syntax
RTRV-ALM-EQPT:[<tid>]:<aid>:<ctag>::[<ntfcncde>],[<condtype>],[<srveff>][,,,,,];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"
;
Example 9-28 RTRV-ALM-EQPT Command and Response
Amp01:ONS15216 EDFA2> RTRV-ALM-EQPT:Amp01:ALL:229::MN,LCRNT1,NSA,,;
Amp01 2002-06-20 14:30:00
M 229 COMPLD
"EQPT:MN,LCRNT1,NSA,6-20,14-25-30,,:\"Excessive Pump1 Current\""
;

Table 9-33 RTRV-ALM-EQPT Syntax Description

Parameter
aid
conddescr
Cisco ONS 15216 EDFA2 Operations Guide
9-38
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
m-d
h-m-s
string
hh:mm:ss
Syntax
EQPT
ALL
Description
Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
Time (hour-minute-second) of the event occurrence (derived
from cerent15216EdfaDateAndTimeString).
Source identifier uniquely identifies the source of a TL1
autonomous command.
Time of origination of TL1 message.
Description
EQPT and ALL have same input effect.
General parameters of the ONS 15216 EDFA2 (not directly
affecting optical signal or power bus).
Any or all of the preceding (command input only).
Detailed text description of the event. The conddescr is 1 to 64
characters of ASCII text. See condtype below.
Chapter 9 TL1 Commands
78-16033-01