Rept Alm Eqpt; Rept Alm Env - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages
Table 9-26 REPT ALM ENV Syntax Description (continued)
Parameter
ntfncde
ocrdat
ocrtm
sid
time

9.7.20 REPT ALM EQPT

Command REPT ALM EQPT
Reports when a general alarm (not directly affecting optical signal or power bus) is logged or cleared
(derived from cerent15216EdfaAlarmState).
Syntax
<sid> <date> <time>
<almcde> <atag> REPT ALM EQPT
"<aid>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"
;
Example 9-22 REPT ALM EQPT Message
Amp01 2001-06-18 14:48:44
* 141 REPT ALM EQPT
"EQPT:MN,LCRNT1,NSA,6-18,14-48-44,,:\"Excessive Pump1 Current\""
;
Cisco ONS 15216 EDFA2 Operations Guide
9-28
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
CR
MJ
MN
CL
NA
m-d
h-m-s
string
hh:mm:ss
Description
Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
Critical alarm.
Major alarm.
Minor alarm.
Cleared alarm.
No alarm.
Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
Time (hour-minute-second) of the event occurrence (derived
from cerent15216EdfaDateAndTimeString).
Source identifier uniquely identifies the source of a TL1
autonomous command.
Time of origination of TL1 message.
Chapter 9 TL1 Commands
78-16033-01