Working With The Flash File System; Displaying Available File Systems - Cisco 3200 Series Hardware Reference Manual

Managing Firmware and Configurations
This chapter describes how to manipulate the flash file system, how to copy configuration files, and how
to archive (upload and download) software images. It consists of these sections:
•
•
•

Working with the Flash File System

The flash file system on your WMIC provides several commands to help you manage software image
and configuration files.
The flash file system is a single flash device on which you can store files. This flash device is called
flash:.
This section provides information on the following topics:
•
•
•
•
•
•
•
•
•

Displaying Available File Systems

To display the available file systems on your WMIC, use the show file systems command as shown in
this example:
bridge# show file systems
File Systems:
OL-5816-10
Working with the Flash File System, page 7-1
Working with Configuration Files, page 7-7
Working with Software Images, page 7-18
Displaying Available File Systems, page 7-1
Setting the Default File System, page 7-2
Displaying Information About Files on a File System, page 7-3
Changing Directories and Displaying the Working Directory, page 7-3
Creating and Removing Directories, page 7-3
Copying Files, page 7-4
Deleting Files, page 7-5
Creating, Displaying, and Extracting tar Files, page 7-5
Displaying the Contents of a File, page 7-7
Size(b) Free(b)
C H A P T E R
Type Flags Prefixes
Cisco 3200 Series Router Hardware Reference
7
7-1