Table of Contents
Advertisement
4
SERVO PARAMETER SETTING METHOD
Servo parameters can be set using the methods shown below. Set the servo parameters using one of these methods.
4.1
Engineering tool
Servo parameters can be set using an engineering tool manufactured by Mitsubishi Electric such as MR Configurator2.
Connect a personal computer and the servo amplifier via a USB cable or a network. For details on how to set servo
parameters, refer to Help or the manual for the engineering tool.
4.2
Controller
Servo parameters can be set using a controller that is compatible with SSCNET III/H. For details on how to use a controller,
refer to the manual for the controller being used.
4 SERVO PARAMETER SETTING METHOD
150
4.1 Engineering tool
Advertisement
Table of Contents
