[Pr. PF88_Drive recorder - Analog channel setting 2 (DRAC2)]
Initial value
02040003h
[Pr. PF88.0-2_Drive recorder - Analog channel 3 selection]
Initial value
003h
Select the analog channel 3 of the drive recorder.
The servo parameter is disabled in the following conditions.
• [Pr. PF80.0 Drive recorder - Operation mode selection] is set to "0" (automatic setting mode)
Refer to the following for values that can be assigned.
Page 112 [Pr. PF87.0-2_Drive recorder - Analog channel 1 selection]
[Pr. PF88.4-6_Drive recorder - Analog channel 4 selection]
Initial value
204h
Select the analog channel 4 of the drive recorder.
The servo parameter is disabled in the following conditions.
• [Pr. PF80.0 Drive recorder - Operation mode selection] is set to "0" (automatic setting mode)
Refer to the following for values that can be assigned.
Page 112 [Pr. PF87.0-2_Drive recorder - Analog channel 1 selection]
1 SERVO PARAMETER DETAILS
114
1.7 Extension setting 3 servo parameters group ([Pr. PF_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting method
Each axis
Ver.
C4
Ver.
C4
Ver.
Refer to the relevant detail No.