Omron SYSMAC CS1W-CLK11 Operation Manual page 106

Setting Data Links
CS/CJ-series Startup Node
DM 30000 + 100 × Controller Link Unit number
N:
15 14 13 12 11 10 9
– –
0 0
Word N
0: Always specify 0.
– : By other setting
15
Area 1 data link start word (BCD)
N+1
N+2 Area 1 type
N+3 Number of send words per node of area 1 (BCD)
N+4 Rightmost 4 digits of data link start word of area 2 (DM area) (BCD)
Area 2 type
N+5
N+6 Number of send words per node of area 2 (BCD)
N+7 First data link status word (BCD)
15 14 13 12 11 10 9
N+8
16 15 14 13 12 11 10 9
N+9
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
BCD: Set the value as binary-coded decimal.
Settings
90
Set the following DM parameter area of the PC of the startup node.
8 7 6 5 4
0 0 0 0 0 0
8 7
00
Leftmost digit of data link start word of
area 2 (BCD)
8 7 6 5 4
8 7 6 5
Item
Data link mode
Area 1 data link start
word
Area 1 type
Number of send words
per node of area 1
Area 2 data link start
word
Area 2 type
3 2 1 0
–
0 0 0
Data link mode
Set to 01 for automatic setting.
(00 is for manual setting. Other values are invalid.)
0
3 2 1 0
4 3 2 1
Nodes to participate in the data links
The numbers indicate node numbers.
The value assigned indicates whether the
node is to participate in the data links.
Participate:
Not participate: 0
Setting range
Specify automatic (01).
Set the word address in BCD.
CIO Area: CIO 000 to CIO 6143
LR Area: LR 00 to 199 (*)
*: When a word between LR 000 and LR 199 is speci-
fied, the data link area will be allocated between CIO
1000 and CIO 1199.
Set the area for area 1 in BCD.
IR Area: 80
LR Area: 86
Area 1 not used: 00
Set the number of words in BCD between 0 and 1,000.
The total number of send words for area 1 and area 2
must not exceed 1,000.
When area 1 is not used, set to 0.
Set the word address in BCD.
DM Area: DM 0000 to DM 32767
EM Area: Banks 00 to 12, EM 0000 to EM 32767
Set the area type for area 2 in BCD.
DM Area: 82
EM Area: Banks 00 to 07: 90 to 97
Banks 08 to 12: A8 to AC
Area 2 not used: 00
Section 5-2
1