Selection Of Communications Functions - Omron SYSMAC CS1W-CLK11 Operation Manual

Selection of Communications Functions

When Operating on Personal Computer as Peripheral Software
IBM PC/AT or
compatible
Setting data link tables
When Operating on Personal Computer Connected as a Node
1-3 Selection of Communications Functions
14
+
CX-Net in
CX-Programmer
CX-Net in
CX-Programmer
Controller Link
Support Board
Software
CX-Programmer
Note 1. For further details about the CX-Programmer, refer to the WS02-CXP##-
E CX-Programmer Operation Manual.
2. Use version 1.54 or later of CX-Net in version 2.04 or later of the CX-Pro-
grammer for the CJ-series Controller Link Unit.
Select the data link function if alarm or status data (in bits) must be constantly
shared between PCs or between a PC and an IBM PC/AT or compatible com-
puter or if the present value or set value data (in words) must be constantly
shared between PCs or between a PC and an IBM PC/AT or compatible com-
puter.
Select the message service function (SEND/RECV instructions or CMND
instructions) if data (in words) must be sent (or received) from one PC to other
PCs in other nodes or from one PC to IBM PC/AT or compatible computers.
Nodes
RS-232C
Transmissions
IBM PC/AT or compatible
+
Setting data link tables
External
appearance
WS02-CXP
Section 1-3
Controller
Link Unit
CPU Unit
Model Applicable PCs
##
CS/CJ-series,
-E
C200HX/HG/HE,
CVM1, CV-series,
and CQM1H-series
PCs