Table of Contents
Advertisement
3.
INSTALLATION
The 2432RX2-HDMI is a compact module that has four BNC connectors for serial digital input, four BNC
connectors for analog audio output (BNC to RCA connector included), 4 fiber optic connectors (2 per
SFP), two HDMI connectors for video outputs, one DB-9 serial port connector for settings and one
Ethernet connector for control and monitoring.
3.1.
POWER
The 2432RX2-HDMI comes with an auto-ranging DC voltage adapter that automatically senses the input
voltage. Power should be applied by connecting a 3-wire grounding type power supply cord to the power
entry module on the DC voltage adapter. The power cord should be minimum 18 AWG wire size; type
SST marked VW-1, maximum 2.5 m in length. The DC cable of the voltage adapter should be connected
to the DC power jack on the rear panel. A green LED located beside the DIP switch connector will be
illuminated when there is power applied to the 2432RX2-HDMI.
3.2.
HDMI CONNECTORS
HDMI connector is for digital video output.
INSTALLATION
Figure 3-1 : 2432RX2-HDMI Rear View
Figure 3-2 : 2432RX2-HDMI Front View
Revision 1.0
Dual Path Serial Digital to HDMI Converter
2432RX2-HDMI
Page - 5
Advertisement
Table of Contents
