Figure 4-13 : Gain Level Controls; Figure 4-14 : Gamma Level; Figure 4-15 : Red, Green, Blue Gamma Levels; Figure 4-16 : Rgb Limiter - evertz 2432RX2-HDMI User Manual

G Offset: Ranges from –200 to 200 quantization levels in 1 level increment.
B Offset: Ranges from –200 to 200 quantization levels in 1 level increment.
Gamma Level
•
With this control, the user can adjust the overall Gamma correction factor from - 128 to + 127 in
increments of 1.
Gamma Level:
• Red, Green, Blue Gamma Levels
With these controls, the user can individually adjust the Red, Green, and Blue Gamma levels from
– 128 to + 127 in increments of 1.
Red Gamma Level:
Green Gamma Level:
Blue Gamma Level:
RGB Limiter
•
The RGB Clip parameters control RGB clipping/color legalization process. When set to enable,
the module will clip any illegal levels of R, G, and B (individually) to their respective Black and
White Levels. If disabled, then the illegal values are passed unmodified.
RGB Lower Limit:
RGB Upper Limit:
UPGRADING FIRMWARE

Figure 4-13 : Gain Level Controls

Ranges from –128 to 127 in 1 level increments.

Figure 4-14 : Gamma Level

Ranges from –128 to 127 in 1 level increments.
Ranges from –128 to 127 in 1 level increments.
Ranges from –128 to 127 in 1 level increments.

Figure 4-15 : Red, Green, Blue Gamma Levels

Ranges from 0 to 1023 in 1 level increment.
Ranges from 0 to 1023 in 1 level increment.

Figure 4-16 : RGB Limiter

Revision 1.0
Dual Path Serial Digital to HDMI Converter
2432RX2-HDMI
Page - 19