Loading/transporting the machine – Lashing the machine to the transport vehicle
7.2 Lashing the machine to the transport vehicle
Fig. 41
Do not use damaged or in any other way impaired lashing points.
Always use appropriate lifting and lashing means on the lifting and
lashing points.
Use lifting and lashing gear only in the prescribed direction of load
application.
Lifting tackle must not be damaged by machine components.
Protective equipment:
WARNING!
Danger of burning on hot components!
–
Wear your personal protective equipment (protec-
tive gloves, protective clothing).
1.
Lean the tamper foot against the side wall of the transport
vehicle.
2.
Fasten the tamper on the transport vehicle with at least two
lashing belts.
BT 65
n
Protective gloves
61