Fitting; Fitting And Removing The On-Board Computer (See Figure A) - Bosch Kiox Original Operating Instructions

English – 10
of the EU Declaration of Conformity can be accessed at the following Inter-
net address: https://www.ebike-connect.com/conformity

Fitting

A
(18)
(14)
(16)
(1) On-board computer
(5) Holder for on-board computer
(14) Drive unit contacts
(15) Locking screw for on-board computer
(16) Headset screw
(18) Magnet holder

Fitting and removing the on-board computer (see figure A)

Fit the lower part of the Kiox into the holder (5) first and tilt it forward gently
until you can feel that the on-board computer is firmly fixed in the magnetic
holder.
1 270 U20 Ken | (13.11.2018)
(1)
1
(5)
(15)
2
Bosch eBike Systems