7
Maintenance
In this Chapter
General Notes on Maintenance ................................................................................... 31
Cleaning the P-73x ...................................................................................................... 31
7.1 General Notes on Maintenance
NOTICE
Misalignment from loosening screws!
The P-73x is maintenance-free and achieves its positioning accuracy as a result of
the optimum alignment of mechanical components and piezo actuators. Loosened
screws cause a loss in positioning accuracy.
Only loosen screws according to the instructions in this manual.
Do not open the P-73x.
7.2 Cleaning the P-73x
Prerequisites
You have discharged the piezo actuators of the P-73x (p. 30).
You have disconnected the P-73x from the controller.
Cleaning the P-73x
Clean the surfaces of the P-73x with a cloth slightly dampened with a mild
Do not do any ultrasonic cleaning.
P-73x Nanopositioners
cleanser or disinfectant (e.g. alcohol or isopropanol).
PZ103E
7 Maintenance
Version: 1.0.0
31