2
Safety
In this Chapter
Intended Use ................................................................................................................. 5
General Safety Instructions ........................................................................................... 6
Organizational Measures ............................................................................................... 7
2.1 Intended Use
The P-73x is a laboratory device as defined by DIN EN 61010-1. It is intended to be
used in interior spaces and in an environment which is free of dirt, oil, and lubricants.
Based on its design and realization, the P-73x is intended for fine positioning as well
as the fast and precise motion of small objects. The specifications of the P-73x apply
to horizontal mounting. Depending on the model, the motion is performed as follows:
The intended use of the P-73x is only possible in combination with suitable drive and
control electronics (p. 50) available from PI. The electronics is not included in the
scope of delivery of the P-73x.
The electronics must provide the required operating voltages. To ensure proper
performance of the servo-control system, the electronics must be able to read out and
process the signals from the capacitive sensors.
P-73x Nanopositioners
in two axes horizontally,
in three axes horizontally and vertically,
in one axis vertically.
PZ103E
Version: 1.0.0
2 Safety
5